these flters are manufactured on quartz, which provides optimal temperature performance and are available from 80 -1600 mhz. this tcrf is designed for narrowband if fltering such as in satellite transponders, directional fnders and anti-jam modems. other packaging styles are available for more rugged environments and applications. standard part numbers as well as custom solutions are available. please contact sales for more information. saw filter 162 mhz saw bandpass filter, 0.06 mhz bandwidth SF0162BA03266S typical performance center = 162 mhz, 0.2 mhz/div (2.5 khz incr) 8/2012 ? 13.3 x 6.5 mm ceramic lcc, 10 pads ? rohs compliant
parameter min typ max units minimum insertion loss - 3.4 6 db device delay - 7.4 - sec 1 db bandwidth 0.06 0.10 - mhz lower 1 db frequency - 161.95 161.97 mhz upper 1 db frequency 162.03 162.05 - mhz 3 db bandwidth - 0.12 - mhz center frequency (fc, 3 db) 1 - 162 - mhz 45 db bandwidth 2 - 0.39 - mhz lower 45 db frequency 2 161.2 161.8 - mhz upper 45 db frequency 2 - 162.2 162.4 mhz rejection (159.5-161.2 mhz) 2 45 48 - db rejection (162.4-164.5 mhz) 2 43 46 - db source and load impedance 50 ohms ambient temperature 25 c specification notes: 1. reference frequency. computed as mean of the 3 db frequencies. 2. all db values are referenced to the insertion loss value. notes: ? recommend 2% toleranced matching components. typical inductor q=40. ? values shown are for reference only. actual values are dependent upon board layout. maximum ratings matching circuit parameter min max units storage temperature range -40 85 c operating temperature range 10 60 c input power level - 20 dbm 8/2012
package outline marking suggested footprint units: mm tolerances are 0.15 mm except where indicated. pad confguration: input: 10 output: 5 ground: all other pads package material: body: al 2 o 3 ceramic lid: kovar, ni plated terminations: au plating 1 m min, over a 1.3 - 8.9 m ni plating 8/2012 +1 855.294.3800 www.apitech.com +1 888.553.7531 apitech.com/microwave 8/2012
|
